1200C 1-Zone 25mm OD Compact Rotary Top-Open Tube Furnace
$6,590.00
STF1200 25mm OD compact top-open rotary tube furnaces feature spiral wire coils embedded in Mitsubishi (Japan) alumina fiber insulation. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by a multi-segment digital controller.
Features
- Compact, portable and lightweight design.
- Top-open furnace chamber for fast and easy tube access.
- Standard package includes set of stainless steel vacuum sealing flanges with valves and pressure meter.
- Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot.
- Multiple atmosphere processes in a single cycle are possible (ex: binder burn out in air and parts sintering under rough vacuum or inert gas environment.)
- Long life type K thermocouple.
Safety
- Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller's manual) or when the thermocouple is broken or malfunctions.
- Power failure protection resumes furnace operation right after the point of failure when power is reestablished.
- Limit switch turns off furnace once top is open
Warning! NEVER fill furnace with explosive gases, including Hydrogen, Carbon Monoxide and Methane.
Specifications
| Electrical requirements | 115V, 50/60Hz, 1~phase, 1,500 watts |
| Tube | 25mm OD x 700mm L, Quartz * 2" diameter x 5" L in the center with baffle |
| Maximum working temperature | 1200°C (2 hours maximum continuous run time) |
| Constant working temperature | 1100°C |
| Rotation speed | 0 to 20 rpm |
| Constant working temperature under vacuum | 1000°C |
| Rated vacuum pressure | 0.001 Pa / 0.0075 millitorr / 0.00001 mbar |
| Rated positive pressure | 0.02 MPa / 150 torr / 3 psi |
| Heating element type | Kanthal-A1 resistance coil wire |
| Thermo couple type | K |
| Refractory lining | Mitsubishi (Japan) 1500 grade fiber alumina |
| Temperature controller | Single PID, 30 segments |
| Maximum heating rate | < 30°C/min (recommended 15°C/min) |
| Heating zone length | 8" |
| Temperature controller precision | +/- 1°C |
| Vacuum sealing flange kit | Stainless steel vacuum sealing flanges with one vacuum gauge, two valves and four thermal ceramic blocks. |
| Gas inlet/outlet | 1/4" hose barb with 1/4" BSPP (British standard parallel pipe) |
| Unit dimensions | 23 x 14 x 17.5" (WxDxH) without tube |
| Unit weight | 140 Lb |
How to Install an Across International Tube Sealing Flange
Standard package
| Part description | Quantity | Part image |
| STF1200 25mm OD top-open rotary tube furnace | 1 pc |
|
| Quartz tube 25mm OD x 700mm L * 2" diameter x 5" L in the center with baffle | 1 pc |
|
| Stainless steel vacuum sealing flanges w/ pressure meter | 1 set |
|
| Stainless steel hook | 1 pc |
|
| Tube thermal block | 4 pcs |
|
| Spare fuse | 2 pcs |  |
| Thermal gloves | 1 pair |
|
| Furnace operation manual | 1 pc |
|
.jpg)
.jpg)
.jpg)
Additional information
| Weight | 140 lbs |
|---|---|
| Dimensions | 23 × 14 × 17.5 cm |
| Vacuum setup | 3/8" hose barb with no pump (no extra charge), KF25 flange port with no pump (no extra charge), Ai 110/220V EasyVac 7 cfm pump w/ mist filter (+$590.00), Ai 110/220V EasyVac 9 cfm 2-Stage pump w/ filter (+$790.00), Ai 110/220V SuperVac 5.6 cfm 0.3 micron pump (+$1,890.00), Ai 110V SuperVac 11cfm 0.3 micron pump (+$2,690.00) |
| Accessory | No additional accessories (no extra charge), 2 quarts (1.9 L) of ultra grade 19 pump oil (+$44.00), EZ-Swap vacuum pump exhaust filter w/ fittings (+$159.00) |
| Delivery liftgate service | I do not need liftgate service +$0.00, Yes, I need liftgate service +$45.00 |
Reviews
There are no reviews yet.