Every one of our vacuum ovens goes through a 2-time 24-hour vacuum leak test, and is quality controlled in New Jersey or Nevada before leaving our warehouses.
- ETL tested to UL and CSA standards
- New KF25 inlet filter keeps your oven clean at all time (included with oven purchase).
- All stainless steel internal tubing provides higher ultimate vacuum, holds vacuum 10 times longer, and require minimum maintenance.
- Oil-filled mechanical vacuum gauge provides more accurate reading, longer gauge life and minimizes shipping damage.
- All stainless steel vacuum and vent valves gives you cleaner connection, more accurate control and long term durability.
- 4th gen low proportional gain temperature controllers keep your oven temperature within +/- 1°F accuracy, in either °F or °C.
- Best choice for the curing and converting of oil extracts. With deep vacuum level, they can operate at temperatures which allow the degassing/purging process to occur rapidly, thus increase productivity and allow for the production of superior quality products with minimal processing time.
- Dual layer observation window with 3/4″ tempered safety glass.
- 3″ thermal insulation prevents heat loss and minimizes the enclosure’s outer surface temperature.
- Easy-to-clean stainless steel interior for exceptional durability and ease of maintenance.
- A vacuum environment lowers the boiling point (great for processing heat sensitive materials) and reduces drying time for materials like paste or powder which cannot otherwise be easily dried.
- Built-in alarm alerts you when oven has been shut down by safety circuitry due to out of range temperature.
- Built-in swivel casters with leveling feet.
- For improved temperature tracking, run the auto-tune procedure as outlined in the manual.
- All ovens shipped from our New Jersey or Nevada location for quick delivery.
- 2-year warranty and lifetime US-based parts and service support.
- Guaranteed US based phone and email assistance within 30 minutes from our engineers.
Manufactured in accordance with
- UL 61010-1
- CSA C22.2
- ISO 9001:2000
- ISO 12100-1:2003, ISO 12100-2:2003
- EN1050:1996, EN294:1992, EN60204-1:2006
IMPORTANT! NEVER LEAVE YOUR OVEN UNATTENDED WHILE OPERATING. Across International is not responsible for any loss of material inside of the oven.
Vacuum oven specifications
|Electrical requirements||220V +/-10% 50/60Hz 1-PH 21A, 4,600 watts|
|Chamber|| Size: 22 x 23.5 x 25″|
Material: Stainless steel
Capacity: 7.5 cubic feet
|Heater||5-sided heating (left 900W, right 900W, top 900W, bottom 900W, back 250W x 4)|
|Temperature control|| Controller: low proportional gain, microcomputer PID controlled with LCD display|
Range: ambient to 250°C (480°F)
Display units: Fahrenheit or Celsius
Uniformity: +/- 7% of setpoint
Dwelling timer range: 1 to 9999 minutes
Warm-up time to 100°F: 45 minutes
Warm-up time to 480°F: 2 hours 15 minutes
|Vacuum|| Ultimate vacuum level: better than 500 microns/millitorrs|
(may vary based on your altitude, click here to learn more)
Mechanical gauge range: 0 to 30 inch mercury
Vacuum port: KF25 flange x 1
Vent port: KF25 flange x 1
Vacuum pump: Sold separately
|Weight||Unit: 450 Lbs, shipping: 680 Lbs|
|Dimensions (WxDxH)|| Unit: 37 x 35.5 x 38″|
Shipping: 42 x 40 x 43″
|Shelves|| Shelf size: 21.75 x 23 x 0.5″ (WxDxH)|
Capacity: 18 shelves max.
Comes standard with oven purchase: 9 shelves
Total area with 18 shelves: 61.8 sq ft or 8901 sq inch
Distance between the most adjacent shelves: 1.25 inches
|Door gasket material||Silicone or Viton|
|Observation window||1/2″ tempered safety glass|
|Safety|| Built-in circuit breaker|
Overheat shutoff protection
Secondary over-temp protection dial
|In-door lights||White LED (pre-installed)|
|Compliance||ETL tested to UL and CSA standards|
|Part description|| Quantity||Part image|
|Ai 7.5 cu ft 5 sided heating vacuum oven||1 pc|
|KF25 quick clamp and centering ring||2 sets|
|Aluminum pan shelf||9 pcs|
|Inlet filter with KF25 connection||1 pc|
|L6-30P 230V plug (installed)||1 pc|
|User’s manual||1 pc|